dmesg - 1st run
Linux version 5.15.0-130-generic (buildd@lcy02-amd64-056) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #140-Ubuntu SMP Wed Dec 18 17:59:53 UTC 2024 (Ubuntu 5.15.0-130.140-generic 5.15.168)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20e000-0x00000000c9ef7fff] usable
BIOS-e820: [mem 0x00000000c9ef8000-0x00000000ca25bfff] reserved
BIOS-e820: [mem 0x00000000ca25c000-0x00000000ca4cffff] ACPI data
BIOS-e820: [mem 0x00000000ca4d0000-0x00000000cac7cfff] ACPI NVS
BIOS-e820: [mem 0x00000000cac7d000-0x00000000cb9fefff] reserved
BIOS-e820: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042f37ffff] usable
BIOS-e820: [mem 0x000000042f380000-0x000000042fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xb70e9018-0xb70f7067] usable ==> usable
e820: update [mem 0xb70e9018-0xb70f7067] usable ==> usable
e820: update [mem 0xb70ca018-0xb70e8457] usable ==> usable
e820: update [mem 0xb70ca018-0xb70e8457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20e000-0x00000000b70ca017] usable
reserve setup_data: [mem 0x00000000b70ca018-0x00000000b70e8457] usable
reserve setup_data: [mem 0x00000000b70e8458-0x00000000b70e9017] usable
reserve setup_data: [mem 0x00000000b70e9018-0x00000000b70f7067] usable
reserve setup_data: [mem 0x00000000b70f7068-0x00000000c9ef7fff] usable
reserve setup_data: [mem 0x00000000c9ef8000-0x00000000ca25bfff] reserved
reserve setup_data: [mem 0x00000000ca25c000-0x00000000ca4cffff] ACPI data
reserve setup_data: [mem 0x00000000ca4d0000-0x00000000cac7cfff] ACPI NVS
reserve setup_data: [mem 0x00000000cac7d000-0x00000000cb9fefff] reserved
reserve setup_data: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
reserve setup_data: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000042f37ffff] usable
reserve setup_data: [mem 0x000000042f380000-0x000000042fffffff] reserved
efi: EFI v2.70 by American Megatrends
efi: ACPI=0xca4cf000 ACPI 2.0=0xca4cf014 TPMFinalLog=0xcac30000 SMBIOS=0xcb7ef000 SMBIOS 3.0=0xcb7ee000 MEMATTR=0xc40b7018 ESRT=0xc665ce18 MOKvar=0xcb84e000 RNG=0xca4adc18 TPMEventLog=0xca3ad018
random: crng init done
secureboot: Secure boot disabled
SMBIOS 3.3.0 present.
DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 5003 10/07/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.923 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x42f380 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3327M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xca660000-0xca66ffff] usable ==> reserved
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000c665ce18 to 0x00000000c665ce50.
e820: update [mem 0xc665c000-0xc665cfff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0xb70f8000-0xbe4b4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CA4CF014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CA4CE728 0000DC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000CA4BF000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CA4B3000 00B87F (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000CAC60000 000040
ACPI: SSDT 0x00000000CA4C5000 008CE9 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000CA4C1000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA4C0000 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000CA4B2000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CA3B8000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x00000000CA4B0000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000CA4AF000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000CA4AE000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: IVRS 0x00000000CA4AC000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: BGRT 0x00000000CA4AB000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WPBT 0x00000000CA3CC000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: TPM2 0x00000000CA3CB000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: PCCT 0x00000000CA3CA000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000CA3C5000 004043 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000CA3C4000 000F10 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000CA3C3000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000CA3C2000 0002C2 (v02 AMD QOGIRDGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA3C0000 0010C9 (v02 AMD QOGIRTPX 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA3BF000 00052C (v02 AMD QOGIRNOI 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA3BB000 003E6E (v02 AMD QOGIRN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000CA3BA000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000CA3B9000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0xca4bf000-0xca4bf113]
ACPI: Reserving DSDT table memory at [mem 0xca4b3000-0xca4be87e]
ACPI: Reserving FACS table memory at [mem 0xcac60000-0xcac6003f]
ACPI: Reserving SSDT table memory at [mem 0xca4c5000-0xca4cdce8]
ACPI: Reserving SSDT table memory at [mem 0xca4c1000-0xca4c4b8d]
ACPI: Reserving SSDT table memory at [mem 0xca4c0000-0xca4c00fb]
ACPI: Reserving FIDT table memory at [mem 0xca4b2000-0xca4b209b]
ACPI: Reserving FPDT table memory at [mem 0xca3b8000-0xca3b8043]
ACPI: Reserving MCFG table memory at [mem 0xca4b0000-0xca4b003b]
ACPI: Reserving HPET table memory at [mem 0xca4af000-0xca4af037]
ACPI: Reserving SSDT table memory at [mem 0xca4ae000-0xca4ae023]
ACPI: Reserving IVRS table memory at [mem 0xca4ac000-0xca4ac0cf]
ACPI: Reserving BGRT table memory at [mem 0xca4ab000-0xca4ab037]
ACPI: Reserving WPBT table memory at [mem 0xca3cc000-0xca3cc03b]
ACPI: Reserving TPM2 table memory at [mem 0xca3cb000-0xca3cb04b]
ACPI: Reserving PCCT table memory at [mem 0xca3ca000-0xca3ca06d]
ACPI: Reserving SSDT table memory at [mem 0xca3c5000-0xca3c9042]
ACPI: Reserving CRAT table memory at [mem 0xca3c4000-0xca3c4f0f]
ACPI: Reserving CDIT table memory at [mem 0xca3c3000-0xca3c3028]
ACPI: Reserving SSDT table memory at [mem 0xca3c2000-0xca3c22c1]
ACPI: Reserving SSDT table memory at [mem 0xca3c0000-0xca3c10c8]
ACPI: Reserving SSDT table memory at [mem 0xca3bf000-0xca3bf52b]
ACPI: Reserving SSDT table memory at [mem 0xca3bb000-0xca3bee6d]
ACPI: Reserving WSMT table memory at [mem 0xca3ba000-0xca3ba027]
ACPI: Reserving APIC table memory at [mem 0xca3b9000-0xca3b915d]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042f37ffff]
NODE_DATA(0) allocated [mem 0x42f356000-0x42f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d1efff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20e000-0x00000000c9ef7fff]
node 0: [mem 0x00000000cb9ff000-0x00000000ccffffff]
node 0: [mem 0x0000000100000000-0x000000042f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042f37ffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 737 pages in unavailable ranges
On node 0, zone DMA32: 14 pages in unavailable ranges
On node 0, zone DMA32: 6919 pages in unavailable ranges
On node 0, zone Normal: 12288 pages in unavailable ranges
On node 0, zone Normal: 3200 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xc3974000-0xc3d40fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
PM: hibernation: Registered nosave memory: [mem 0xb70ca000-0xb70cafff]
PM: hibernation: Registered nosave memory: [mem 0xb70e8000-0xb70e8fff]
PM: hibernation: Registered nosave memory: [mem 0xb70e9000-0xb70e9fff]
PM: hibernation: Registered nosave memory: [mem 0xb70f7000-0xb70f7fff]
PM: hibernation: Registered nosave memory: [mem 0xc3974000-0xc3d40fff]
PM: hibernation: Registered nosave memory: [mem 0xc665c000-0xc665cfff]
PM: hibernation: Registered nosave memory: [mem 0xc9ef8000-0xca25bfff]
PM: hibernation: Registered nosave memory: [mem 0xca25c000-0xca4cffff]
PM: hibernation: Registered nosave memory: [mem 0xca4d0000-0xcac7cfff]
PM: hibernation: Registered nosave memory: [mem 0xcac7d000-0xcb9fefff]
PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 4105715
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-130-generic", will be passed to user space.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 16038168K/16684196K available (16392K kernel code, 4397K rwdata, 10972K rodata, 3372K init, 18696K bss, 645768K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 50800 entries in 199 pages
ftrace: allocated 199 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3102060a73f, max_idle_ns: 440795305207 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.84 BogoMIPS (lpj=13599692)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Speculative Return Stack Overflow: Mitigation: safe RET
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 44K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 5800X3D 8-Core Processor (family: 0x19, model: 0x21, stepping: 0x2)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8
Spectre V2 : Update user space SMT mitigation: STIBP always-on
#9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (108797.53 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xca4d0000-0xcac7cfff] (8048640 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:49:33, date: 2025-01-23
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1737650973.196:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
pci 0000:00:01.2: PCI bridge to [bus 02-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:03:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:0a.0: enabling Extended Tags
pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfc804000-0xfc804fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfc800000-0xfc803fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:03:04.0: bridge window [io 0xf000-0xffff]
pci 0000:03:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:05:00.0: [1022:1485] type 00 class 0x130000
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:05:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.1: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit]
pci 0000:05:00.1: enabling Extended Tags
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.3: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
pci 0000:05:00.3: enabling Extended Tags
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 05]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:06:00.0: [1022:7901] type 00 class 0x010601
pci 0000:06:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:03:09.0: PCI bridge to [bus 06]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xfc600000-0xfc6007ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:03:0a.0: PCI bridge to [bus 07]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:08:00.0: [1002:1478] type 01 class 0x060400
pci 0000:08:00.0: reg 0x10: [mem 0xfce00000-0xfce03fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:03.1 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
pci 0000:00:03.1: PCI bridge to [bus 08-0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:09:00.0: [1002:1479] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0a]
pci 0000:08:00.0: bridge window [io 0xe000-0xefff]
pci 0000:08:00.0: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:08:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0a:00.0: [1002:73ff] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:0a:00.0: reg 0x24: [mem 0xfcc00000-0xfccfffff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfcd00000-0xfcd1ffff pref]
pci 0000:0a:00.0: BAR 0: assigned to efifb
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:0a:00.1: [1002:ab28] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xfcd20000-0xfcd23fff]
pci 0000:0a:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:09:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0c:00.1: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:0c:00.1: reg 0x24: [mem 0xfcb08000-0xfcb09fff]
pci 0000:0c:00.1: enabling Extended Tags
pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0c:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0c:00.4: reg 0x10: [mem 0xfcb00000-0xfcb07fff]
pci 0000:0c:00.4: enabling Extended Tags
pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xb70ca018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb70e9018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xc3974000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc665c000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc9ef8000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f380000-0x42fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0200-0x021f] has been reserved
pnp 00:04: [dma 0 disabled]
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:03:04.0: bridge window [io 0xf000-0xffff]
pci 0000:03:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:03:08.0: PCI bridge to [bus 05]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:03:09.0: PCI bridge to [bus 06]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:03:0a.0: PCI bridge to [bus 07]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:00:01.2: PCI bridge to [bus 02-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:09:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:08:00.0: PCI bridge to [bus 09-0a]
pci 0000:08:00.0: bridge window [io 0xe000-0xefff]
pci 0000:08:00.0: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:08:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 08-0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: resource 8 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfc400000-0xfc8fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc8fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:05: resource 1 [mem 0xfc400000-0xfc5fffff]
pci_bus 0000:06: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:07: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfcefffff]
pci_bus 0000:08: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xfc900000-0xfcbfffff]
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.2: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:05.0: Adding to iommu group 7
pci 0000:00:07.0: Adding to iommu group 8
pci 0000:00:07.1: Adding to iommu group 9
pci 0000:00:08.0: Adding to iommu group 10
pci 0000:00:08.1: Adding to iommu group 11
pci 0000:00:14.0: Adding to iommu group 12
pci 0000:00:14.3: Adding to iommu group 12
pci 0000:00:18.0: Adding to iommu group 13
pci 0000:00:18.1: Adding to iommu group 13
pci 0000:00:18.2: Adding to iommu group 13
pci 0000:00:18.3: Adding to iommu group 13
pci 0000:00:18.4: Adding to iommu group 13
pci 0000:00:18.5: Adding to iommu group 13
pci 0000:00:18.6: Adding to iommu group 13
pci 0000:00:18.7: Adding to iommu group 13
pci 0000:01:00.0: Adding to iommu group 14
pci 0000:02:00.0: Adding to iommu group 15
pci 0000:03:04.0: Adding to iommu group 16
pci 0000:03:08.0: Adding to iommu group 17
pci 0000:03:09.0: Adding to iommu group 18
pci 0000:03:0a.0: Adding to iommu group 19
pci 0000:04:00.0: Adding to iommu group 20
pci 0000:05:00.0: Adding to iommu group 17
pci 0000:05:00.1: Adding to iommu group 17
pci 0000:05:00.3: Adding to iommu group 17
pci 0000:06:00.0: Adding to iommu group 18
pci 0000:07:00.0: Adding to iommu group 19
pci 0000:08:00.0: Adding to iommu group 21
pci 0000:09:00.0: Adding to iommu group 22
pci 0000:0a:00.0: Adding to iommu group 23
pci 0000:0a:00.1: Adding to iommu group 24
pci 0000:0b:00.0: Adding to iommu group 25
pci 0000:0c:00.0: Adding to iommu group 26
pci 0000:0c:00.1: Adding to iommu group 27
pci 0000:0c:00.3: Adding to iommu group 28
pci 0000:0c:00.4: Adding to iommu group 29
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x58f77ef22294a5a): PPR NX GT IA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b30ca000-0x00000000b70ca000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: AER: enabled with IRQ 28
pcieport 0000:00:01.2: AER: enabled with IRQ 29
pcieport 0000:00:03.1: AER: enabled with IRQ 30
pcieport 0000:00:07.1: AER: enabled with IRQ 32
pcieport 0000:00:08.1: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C004: Found 2 idle states
ACPI: \_PR_.C006: Found 2 idle states
ACPI: \_PR_.C008: Found 2 idle states
ACPI: \_PR_.C00A: Found 2 idle states
ACPI: \_PR_.C00C: Found 2 idle states
ACPI: \_PR_.C00E: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
ACPI: \_PR_.C005: Found 2 idle states
ACPI: \_PR_.C007: Found 2 idle states
ACPI: \_PR_.C009: Found 2 idle states
ACPI: \_PR_.C00B: Found 2 idle states
ACPI: \_PR_.C00D: Found 2 idle states
ACPI: \_PR_.C00F: Found 2 idle states
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2025-01-23T16:49:33 UTC (1737650973)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xd0000000, using 32400k, total 32400k
efifb: mode is 3840x2160x32, linelength=15360, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 118516K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: CPU0: patch_level=0x0a20120e
microcode: CPU1: patch_level=0x0a20120e
microcode: CPU2: patch_level=0x0a20120e
microcode: CPU3: patch_level=0x0a20120e
microcode: CPU4: patch_level=0x0a20120e
microcode: CPU5: patch_level=0x0a20120e
microcode: CPU6: patch_level=0x0a20120e
microcode: CPU7: patch_level=0x0a20120e
microcode: CPU8: patch_level=0x0a20120e
microcode: CPU9: patch_level=0x0a20120e
microcode: CPU10: patch_level=0x0a20120e
microcode: CPU11: patch_level=0x0a20120e
microcode: CPU12: patch_level=0x0a20120e
microcode: CPU13: patch_level=0x0a20120e
microcode: CPU14: patch_level=0x0a20120e
microcode: CPU15: patch_level=0x0a20120e
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (758036842, 312195303)->(1171296506, -101064361)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 682c6a7f321ac1add9d343d86a326ef485d32cbe'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 682c6a7f321ac1add9d343d86a326ef485d32cbe'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:183:844
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3372K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1316K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.0-130-generic
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
ahci 0000:06:00.0: version 3.0
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:05:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.1
ahci 0000:06:00.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x1c impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
scsi host0: ahci
scsi host1: ahci
nvme nvme0: pci function 0000:01:00.0
scsi host2: ahci
scsi host3: ahci
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
scsi host4: ahci
usb usb2: SerialNumber: 0000:05:00.1
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700200 irq 46
ata4: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700300 irq 48
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3
cryptd: max_cpu_qlen set to 1000
xhci_hcd 0000:05:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4
scsi host8: ahci
xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
usb usb3: SerialNumber: 0000:05:00.3
scsi host9: ahci
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
scsi host10: ahci
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata9: DUMMY
ata10: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600300 irq 66
ata11: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600380 irq 67
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
usb usb4: SerialNumber: 0000:05:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
usb usb5: SerialNumber: 0000:0c:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.15.0-130-generic xhci-hcd
usb usb6: SerialNumber: 0000:0c:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
r8169 0000:04:00.0 eth0: RTL8168h/8111h, a8:5e:45:51:a3:98, XID 541, IRQ 95
r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
nvme nvme0: 32/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4
tsc: Refined TSC clocksource calibration: 3400.000 MHz
usb 3-1: new full-speed USB device number 2 using xhci_hcd
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024ec0a0e, max_idle_ns: 440795247338 ns
usb 5-3: new full-speed USB device number 2 using xhci_hcd
clocksource: Switched to clocksource tsc
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: OCZ-AGILITY4, 1.4.1, max UDMA/133
ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ATA-11: ST8000VN004-3CP101, SC60, max UDMA/133
ata4.00: configured for UDMA/133
ata10.00: ATA-8: Hitachi HUA723030ALA640, MKAOAA10, max UDMA/133
ata10.00: ATA Identify Device Log not supported
ata10.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata10.00: ATA Identify Device Log not supported
ata10.00: configured for UDMA/133
ata11.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: TEAM TM8PS7256G, S1127B0, max UDMA/133
ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
usb 3-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Receiver
usb 3-1: Manufacturer: Logitech
usb 5-3: New USB device found, idVendor=046d, idProduct=c08b, bcdDevice=27.03
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-3: Product: G502 HERO Gaming Mouse
usb 5-3: Manufacturer: Logitech
usb 5-3: SerialNumber: 127139673833
ata11.00: ATA Identify Device Log not supported
ata11.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata3.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: Features: NCQ-sndrcv
hid: raw HID events driver (C) Jiri Kosina
ata11.00: ATA Identify Device Log not supported
ata11.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST8000VN004-3CP1 SC60 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Direct-Access ATA OCZ-AGILITY4 1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA TEAM TM8PS7256G 7B0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 9:0:0:0: Direct-Access ATA Hitachi HUA72303 AA10 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 10:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
sde: sde1 sde2
sd 10:0:0:0: [sde] Attached SCSI disk
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sdd: sdd1 sdd2
sd 9:0:0:0: [sdd] Attached SCSI disk
r8169 0000:04:00.0 enp4s0: renamed from eth0
asus_wmi: ASUS WMI generic driver loaded
AMD-Vi: AMD IOMMUv2 loaded and initialized
usb 3-2: new full-speed USB device number 3 using xhci_hcd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-3/5-3:1.0/0003:046D:C08B.0001/input/input2
hid-generic 0003:046D:C08B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:0c:00.3-3/input0
input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-3/5-3:1.1/0003:046D:C08B.0002/input/input3
[drm] amdgpu kernel modesetting enabled.
hid-generic 0003:046D:C08B.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:0c:00.3-3/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.0/0003:046D:C52B.0003/input/input6
amdgpu: Ignoring ACPI CRAT on non-APU system
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
checking generic (d0000000 1fa4000) vs hw (d0000000 10000000)
[drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x1EAE:0x6505 0xC7).
amdgpu 0000:0a:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xFCC00000
[drm] register mmio size: 1048576
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:0a:00.0: No more image in the PCI ROM
amdgpu 0000:0a:00.0: amdgpu: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-23L86HMD2-D02
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu 0000:0a:00.0: vgaarb: deactivate vga console
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:0a:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
amdgpu 0000:0a:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
amdgpu 0000:0a:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 128bits GDDR6
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 8176M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008001FA4000).
amdgpu 0000:0a:00.0: amdgpu: PSP runtime database doesn't exist
hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:05:00.3-1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.1/0003:046D:C52B.0004/input/input7
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.1/0003:046D:C52B.0004/input/input8
usb 3-2: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: 2.4G Mouse
input: 2.4G Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-2/3-2:1.0/0003:1EA7:0064.0006/input/input11
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.1/0003:046D:C52B.0004/input/input9
hid-generic 0003:046D:C52B.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:05:00.3-1/input1
hid-generic 0003:046D:C52B.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:05:00.3-1/input2
input: 2.4G Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-2/3-2:1.0/0003:1EA7:0064.0006/input/input12
hid-generic 0003:1EA7:0064.0006: input,hiddev3,hidraw5: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:05:00.3-2/input0
usb 3-3: new full-speed USB device number 4 using xhci_hcd
usb 3-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-3: Product: CSR8510 A10
usb 3-5: new full-speed USB device number 5 using xhci_hcd
usb 3-5: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.00
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.0/0003:046D:C534.0007/input/input13
hid-generic 0003:046D:C534.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:05:00.3-5/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/input/input14
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/input/input15
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/input/input16
hid-generic 0003:046D:C534.0008: input,hiddev4,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:05:00.3-5/input1
usb 3-6: new full-speed USB device number 6 using xhci_hcd
usb 3-6: config 1 has an invalid interface number: 2 but max is 1
usb 3-6: config 1 has no interface number 1
usb 3-6: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: AURA LED Controller
usb 3-6: Manufacturer: AsusTek Computer Inc.
usb 3-6: SerialNumber: 9876543210
hid-generic 0003:0B05:18F3.0009: hiddev5,hidraw8: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:05:00.3-6/input2
[drm] Loading DMUB firmware via PSP: version=0x02020020
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.32 DEC: 4 VEP: 0 Revision: 0
amdgpu 0000:0a:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0x81fe000000 for PSP TMR
amdgpu 0000:0a:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:0a:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:0a:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw version = 0x003b3100 (59.49.0)
amdgpu 0000:0a:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:0a:00.0: amdgpu: use vbios provided pptable
amdgpu 0000:0a:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.149!
[drm] DMUB hardware initialized: version=0x02020020
[drm:dc_link_detect_helper [amdgpu]] *ERROR* No EDID read.
fbcon: Taking over console
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
logitech-djreceiver 0003:046D:C52B.0005: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:05:00.3-1/input2
memmap_init_zone_device initialised 2097152 pages in 16ms
amdgpu: HMM registered 8176MB device memory
amdgpu: SRAT table not found
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x73ff:0x1002]
kfd kfd: amdgpu: added device 1002:73ff
amdgpu 0000:0a:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 28
[drm] fb mappable at 0xD2280000
[drm] vram apper at 0xD0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
input: Logitech Wireless Device PID:4096 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.2/0003:046D:C52B.0005/0003:046D:4096.000A/input/input19
Console: switching to colour frame buffer device 240x67
amdgpu 0000:0a:00.0: [drm] fb0: amdgpudrmfb frame buffer device
hid-generic 0003:046D:4096.000A: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4096] on usb-0000:05:00.3-1/input2:1
logitech-djreceiver 0003:046D:C534.0007: hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:05:00.3-5/input0
input: Logitech Wireless Device PID:200a Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.2/0003:046D:C52B.0005/0003:046D:200A.000B/input/input23
hid-generic 0003:046D:200A.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech Wireless Device PID:200a] on usb-0000:05:00.3-1/input2:2
amdgpu 0000:0a:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[drm] Initialized amdgpu 3.42.0 20150101 for 0000:0a:00.0 on minor 0
logitech-djreceiver 0003:046D:C534.0008: hiddev2,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:05:00.3-5/input1
logitech-djreceiver 0003:046D:C534.0008: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/0003:046D:4023.000C/input/input27
hid-generic 0003:046D:4023.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:05:00.3-5/input1:1
logitech-djreceiver 0003:046D:C534.0008: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4055 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/0003:046D:4055.000D/input/input32
input: Logitech Wireless Mouse PID:4055 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/0003:046D:4055.000D/input/input33
hid-generic 0003:046D:4055.000D: input,hidraw10: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4055] on usb-0000:05:00.3-5/input1:2
input: Logitech ERGO M575 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.2/0003:046D:C52B.0005/0003:046D:4096.000A/input/input37
logitech-hidpp-device 0003:046D:4096.000A: input,hidraw3: USB HID v1.11 Mouse [Logitech ERGO M575] on usb-0000:05:00.3-1/input2:1
input: Logitech K350 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-1/3-1:1.2/0003:046D:C52B.0005/0003:046D:200A.000B/input/input38
logitech-hidpp-device 0003:046D:200A.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:05:00.3-1/input2:2
input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/0003:046D:4023.000C/input/input39
logitech-hidpp-device 0003:046D:4023.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:05:00.3-5/input1:1
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.3/usb3/3-5/3-5:1.1/0003:046D:C534.0008/0003:046D:4055.000D/input/input40
logitech-hidpp-device 0003:046D:4055.000D: input,hidraw10: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:05:00.3-5/input1:2
raid6: avx2x4 gen() 29910 MB/s
raid6: avx2x4 xor() 6819 MB/s
raid6: avx2x2 gen() 36936 MB/s
raid6: avx2x2 xor() 39771 MB/s
raid6: avx2x1 gen() 32484 MB/s
raid6: avx2x1 xor() 36034 MB/s
raid6: sse2x4 gen() 26084 MB/s
raid6: sse2x4 xor() 3659 MB/s
raid6: sse2x2 gen() 22018 MB/s
raid6: sse2x2 xor() 21103 MB/s
raid6: sse2x1 gen() 1430 MB/s
raid6: sse2x1 xor() 19009 MB/s
raid6: using algorithm avx2x2 gen() 36936 MB/s
raid6: .... xor() 39771 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /lib/systemd/system/snapd.service:23: Unknown key name 'RestartMode' in section 'Service', ignoring.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
Adding 2097148k swap on /swapfile. Priority:-2 extents:13 across:117301248k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swaps.
lp: driver loaded but no devices found
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Started Journal Service.
systemd-journald[583]: Received client request to flush runtime journal.
systemd-journald[583]: File /var/log/journal/332d417c48f34210930584eaa48cb1ff/system.journal corrupted or uncleanly shut down, renaming and replacing.
ccp 0000:0c:00.1: enabling device (0000 -> 0002)
ccp 0000:0c:00.1: ccp: unable to access the device: you might be running a broken BIOS.
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input41
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
usbcore: registered new interface driver btusb
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002)
snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input42
Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb; LMP ver=6 subver=22bb; manufacturer=10
snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input47
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input43
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input44
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input48
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input49
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input45
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input46
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input50
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input51
spl: loading out-of-tree module taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v2.1.5-1ubuntu6~22.04.4, ZFS pool version 5000, ZFS filesystem version 5
loop0: detected capacity change from 0 to 213384
loop1: detected capacity change from 0 to 40
loop2: detected capacity change from 0 to 90720
loop3: detected capacity change from 0 to 91008
audit: type=1400 audit(1737668983.685:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1290 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1279 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1284 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1284 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1284 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1288 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1280 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1280 comm="apparmor_parser"
audit: type=1400 audit(1737668983.685:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1287 comm="apparmor_parser"
audit: type=1400 audit(1737668983.689:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1292 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered PF_ALG protocol family
Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
r8169 0000:04:00.0 enp4s0: Link is Down
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
kauditd_printk_skb: 39 callbacks suppressed
audit: type=1400 audit(1737668991.437:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2481 comm="apparmor_parser"
audit: type=1400 audit(1737668991.469:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=2380 comm="cups-browsed" capability=23 capname="sys_nice"
Initializing XFRM netlink socket
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
loop4: detected capacity change from 0 to 8
logitech-hidpp-device 0003:046D:200A.000B: HID++ 1.0 device connected.